Contents

Journal of Friction and Wear

Vol. 37, No. 5, 2016

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Journal of Friction and Wear ISSN 1068-3666.

Effect of Active Gas Mixture Composition on Tribological Behavior of Coatings Obtained by Reactive Magnetron Sputtering of Chromium in Acetylene–Nitrogen and Acetylene–Air Gas Mixtures

M. M. Khrushchov, E. A. Marchenko, M. V. Atamanov, I. S. Levin and Yu. A. Tarelkin p. 407  abstract

Wear of Diamond Dressing Tools at Vibromechanical Type of Dressing Abrasive Discs

A. V. Korolev and A. A. Korolev p. 415  abstract

Fracture as a Wear Mechanism of Ceramics Based on a Partially Stabilized Zirconia during Dry Friction Against Steel

G. Ya. Akimov p. 419  abstract

Minimization of Abrasive Wear for the Internal Surface of the Hub of a Friction Pair

V. M. Mirsalimov and P. E. Aknundova p. 424  abstract

The Effect of Lubricants on Tribological Characteristics of Fibrous Materials

T. Yu. Stepanova p. 430  abstract

Tribochemical Processes in Engine Oil with Copper Nanoparticles and Azomethine Ligand

A. G. Ponomarenko, M. V. Boiko, A. G. Kalmykova, T. G. Boiko, T. A. Shiryaeva and A. S. Burlov p. 435  abstract

Improving the Efficiency of Lubricants by Introducing Friction Modifiers for Tracked Vehicles under Stationary Conditions of Friction

N. F. Dmitrichenko, A. A. Milanenko, A. N. Savchuk, O. N. Bilyakovich, Y. A. Turitsa, M. V. Pavlovskiy and S. I. Artemuk p. 441  abstract

Tribological Properties of Combined Molybdenum Coatings Formed by Electric-Spark Alloying on Stainless Steel

J. Padgurskas, V. Agafii, V. Mikhailov, R. Rukuiza and R. Kreivaitis p. 448  abstract

Tribological Characteristics of Composite Coatings Formed by Laser Cladding of Powders of Nickel Self-Fluxing Alloy and Bronze

E. E. Feldshtein, O. G. Devojno, M. A. Kardapolava, N. I. Lutsko, D. Żurek and M. Michalski p. 454  abstract

Provision of the Required Wear Resistance Criteria of Heavy-Duty Gas Turbine Engine Parts Based on the Control of the Cutting Conditions

T. D. Kozhina and V. F. Bezyazychny p. 462  abstract

The Complex Express Evaluation of Tribotechnical Properties of Antifriction Aluminum Alloys by Sclerometric Tests

B. Ya. Sachek, A. M. Mezrin, T. I. Muravyeva and O. O. Stolyarova p. 469  abstract

The Effect of the Coefficient of Journal Friction in Ball-and-Socket Bogie Body Pivots on the Work Done by Friction Forces in Curvilinear Motion

V. I. Kolesnikov, A. A. Zarif’yan, A. P. Sychev and I. V. Kolesnikov p. 476  abstract

Tribological Characteristics of Low-Voltage Sliding Electrical Contacts of Gold Alloys

K. N. Generalova, I. V. Ryaposov and A. A. Shatsov p. 482  abstract

Estimating Stresses and Movement Work of a Soil-Cultivator Tip Using the Finite-Element Method

R. Skirkus, V. Jankauskas and R. Gaidys p. 489  abstract

Energy-Mechanical Concept of the Durability Prediction of Friction Units on the Wear Resistance Criterion of Elements

A. V. Antsupov, A. V. Antsupov, V. P. Antsupov, M. G. Slobodianskii and V. A. Rusanov p. 494  abstract

Formation of Regular Roughness on Working Surfaces of Friction Units

K. Kh. Makhkamov p. 500  abstract

Metal–Polymer Tribosystems: Basic Recommendations for Creating Composites

I. V. Kolesnikov p. 507  abstract