Contents
Journal of Friction and Wear

Vol. 35, No. 5, 2014

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Journal of Friction and Wear ISSN 1068-3666.

Calculation of Characteristics of Discrete Adhesive Contact

V. V. Izmailov p. 343  abstract

Influence of Viscosity Modifiers on the Rheological Properties of Synthetic Oils

L. V. Markova, V. M. Makarenko, H. Kong, and H.-G. Han p. 351  abstract

Tribological Characteristics of (TiZrHfVNbTa)N Coatings Applied Using
the Vacuum Arc Deposition Method

S. N. Grigoriev, O. V. Sobol, V. M. Beresnev, I. V. Serdyuk, A. D. Pogrebnyak,
D. A. Kolesnikov, and U. S. Nemchenko p. 359  abstract

Abrasive and Fretting Wear Resistance of Refractory Cobalt Alloy Specimens Manufactured
by the Method of Selective Laser Melting

T. V. Tarasova, A. P. Nazarov, and Yu. I. Shalapko p. 365  abstract

Comparison of Tribological Characteristics of Nanostructured TiN, MoN,
and TiN/MoN Arc-PVD Coatings

V. M. Beresnev, O. V. Bondar, B. O. Postolnyi, M. O. Lisovenko, G. Abadias, P. Chartier,
D. A. Kolesnikov, V. N. Borisyuk, B. A. Mukushev, B. R. Zhollybekov, and A. A. Andreev p. 374  abstract

Development of Self-Lubricating Antifriction Materials Based on Polytetrafluoroethylene
and Modified Zeolites

O. V. Gogoleva, A. A. Okhlopkova, and P. N. Petrova p. 383  abstract

Effect of Adhesion Bonds in Friction Contact on Vibroacoustic Signal and Autooscillations

M. P. Kozochkin and A. N. Porvatov p. 389  abstract

Hydrodynamic Analysis of Friction Bearings, Part 1: Consideration
of Noncylindrical Working Surfaces

M. V. Zernin, A. V. Mishin, N. N. Rybkin, and S. V. Shil’ko p. 396  abstract

Study of Wear Rate of Cutting Tools Made from Cr-Based High-Temperature Alloy
during Operation Depending on the Material Properties of the Cutting Tool
and the Rate of Cutting

A. M. Adaskin and V. N. Butrim p. 407  abstract

Interaction of Silicate Additives and Iron Surface

Yu. F. Migal, I. A. Mayba, and D. K. Nazarenko p. 414  abstract

A Method of Increasing Hard-Alloy Wear Resistance via Aerodynamic Impact

A. R. Maslov and A. N. Jigalov p. 421  abstract

Effect of the Number of Layers in Zr–Y–O/Si–Al–N Multilayer Coatings
on Their Mechanical Properties and Wear Resistance

A. R. Shugurov, A. V. Panin, O. V. Evtushenko, V. P. Sergeev, and R. M. Martynyak p. 426  abstract

Development of a Mathematical Model of the Hydroerosive Wear of the Piston Couple
in Hydraulic Machines: Part 1

O. P. Budarova and S. V. Boldyrev p.434  abstract

Wear Resistance of Rolling-Ball Bearings Operating in an Abrasive Medium

Q. Q. Mirzayev and A. Irgashev p. 439  abstract

Calculation of Actual Area in the Contact of a Single Microasperity Modeled by a Cone
with a Smooth Surface of the Part

M. M. Matlin, A. I. Mozgunova, E. N. Kazankina, and V. A. Kazankin p.443  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.